Bulletin Reference

BS0, BS04, BS0A, BS0S Bulletin S0

Blind threaded standoffs installed with their heads flush with one surface of the mounting sheets.

CDS Bulletin MPF

The microPEM® ClampDisk™ fastener is a removable fastener designed to replace screws, adhesive, rivets and other small fasteners.

CFN Bulletin LN

Broaching, nylon insert, self-locking nuts for use in thinner sheet, close-to-edge applications.

CFHA, CFHC, CHA, CHC Bulletin CH

Concealed-head studs installed into a blind milled hole where surface opposite stud must remain unmarred.

CLA, CLS, CLSS Bulletin CL

Nuts that provide load-bearing threads in thin sheets with high pushout and torque-out resistances.

CSOS, CSS Bulletin CH

Concealed-head standoffs installed into a blind milled hole where surface opposite standoff must remain unmarred.

DSO, DSOS Bulletin S0

Threaded standoffs for use in close-to-edge applications.

F, F4 Bulletin F

PEMSERT® flush fasteners are flush with both sides of the sheet.

FE, FEO, FEOX, FEX Bulletin FE

Miniature nuts with strong threads. Available with locking or non-locking threads.

FH, FH4, FHA, FHP, FHS Bulletin FH

Flush-head studs with high pushout and torque-out resistances.

FHL, FHLS Bulletin FH

Low-displacement head studs can be installed close to the edge of a sheet without causing the edge to bulge.

FHX Bulletin FH

Flush-head studs with X-Press™ thread profile are typically used with push-on or other plastic fasteners.

H, HNL Bulletin CL

Nuts with self-locking or non-locking threads that provide high pushout and torque-out resistances.

HF109 Bulletin FH

Property class 10.9 high tensile strength studs meeting 1040 MPa minimum.

HFE Bulletin FH

Studs designed with an enlarged head diameter to provide high-strength in thin sheets.

HFG8 Bulletin FH

Grade 8 high tensile strength studs meeting 150 ksi minimum.

HFH, HFHB, HFHS Bulletin FH

Studs for high-strength applications with high pull through resistance.

HFLH Bulletin FH

Studs are for installation into thin, harder, high-strength materials.

HSCB Bulletin PF

Heat sink mounting system. HSCB (screw), HSR (nut) and HSL (spring).

KF2, KFS2 Bulletin K

Nuts, internally threaded, for mounting on P.C. boards.

KFB3 Bulletin K

Flare-mounted standoffs for mounting on P.C. boards with greater pullout performance.

KFE, KFSE Bulletin K

Threaded or unthreaded standoffs mounted on P.C. boards for stacking or spacing.

KFH Bulletin K

Threaded studs for use as solderable connectors or as permanently mounted studs on P.C. boards.

KSSB Bulletins K & SSA

SNAP-TOP® standoffs featuring a spring action to hold a P.C. Board securely without screws or threaded hardware.

LA4, LAC, LAS Bulletins ALA & LN

Nuts with load-bearing, self-locking threads that permits up to .030" / 0.76 mm adjustment for mating hole misalignment.

LK, LKA, LKS Bulletin LN

Nuts with a unique PEMFLEX® self-locking feature permitting repeated use and effective prevailing locking torque.

MPP Bulletin MPF

microPEM® pins that can be installed into sheets as thin as 0.5 mm.

MSIB Bulletin MPF

SC microPEM® symmetrical designed thru-threaded inserts for

plastics for use in straight or tapered holes.

MS04 Bulletin MPF

Inserts

microPEM® standoffs that can be installed into sheets as thin as .016" / 0.4 mm.

MSOFS Bulletin MPF

microPEM® flaring standoffs attached permanently in panels as thin as .008" / 0.2 mm of any hardness including stainless steel.

PEM C.A.P.S.® Bulletin PF

Colored Access Panel Screws with plastic cap. Key features include Phillips drive and MATHread® anti-cross threading feature.

SC FM

PS10 Bulletin PF

Figure description:

N10 PR10

Flush-mounted panel screw components. N10 (nut), PR10 (retainer) and PS10 (screw).

PF11, PF11M Bulletin PF

Panel fastener assembly with knurled cap and universal slot/ Phillips recess. Available with anti cross-thread feature.

Bulletin PF PF11MF

Flare-mounted captive screw assembly with anti cross-thread feature.

Bulletin PF PF11MW

Floating captive screw assembly allows for mating hole misalignment.

Bulletin PF PF12, PF12M

Panel fastener assembly with smooth cap and universal slot/ Phillips recess. Available with anti cross-thread feature.

PF12MF Bulletin PF

Flare-mounted captive screw assembly with anti cross-

thread feature.

PF12MW Bulletin PF

Floating captive screw assembly allows for mating hole misalignment.

PF30, PF31, PF32 Bulletin PF

Low-profile panel fastener assembly with large knurled head for tool or hand operation.

Bulletin PF PF50

Low-profile panel fastener assembly with large knurled cap and Phillips recess for tool or hand operation.

Bulletin PF PF60

Low-profile panel fastener assembly with large smooth cap and Phillips recess for tool or hand operation.

Bulletin PF PF7M

Small, compact, and low-profile self-clinching captive panel screws designed for limited access areas.

PF7MF Bulletin PF Bulletin PF

Small, compact, and low-profile flaring captive panel screws designed for limited access areas.

PFC2, PFS2 Bulletin PF

Spring-loaded panel fastener assembly for tool or hand operation.

PFC2P Bulletin PF

Panel fastener assembly with Phillips recess for tool only operation.

PFC4 Bulletin PF & SS

Panel fastener assembly for installation into stainless steel sheets with Phillips recess for tool only operation.

PFHV Bulletin PF

Low-cost panel fastener assembly with universal slot/Phillips recess for tool or hand operation.

PFK Bulletins K & PF

Panel fastener assembly for mounting on P.C. boards.

PL, PLC Bulletin LN

PEMHEX® self-locking nuts with a nylon hexagonal element to provide a reusable prevailing torque thread lock.

PSHP Bulletin K

Surface mount panel fastener screw that is used with Type SMTPR retainer.

PSL2, PTL2 Bulletin PF

Spring-loaded plunger assembly. Quick lockout feature on Type PTL2 holds plunger in retracted position.

RAA Bulletin RA

Self-tapping R'ANGLE® fasteners provide strong right angle attachment points in thin sheets.

Bulletin RA RAS

Threaded R'ANGLE® fasteners provide strong right angle attachment points in thin sheets.

S, SS Bulletin CL

Nuts that provide load-bearing threads in thin sheets with high pushout and torque-out resistances.

SC S-RT Bulletin CL

Free-running locknuts with a thread form that creates a lock when clamp load is applied.

SCB Bulletin PF

The spinning clinch bolt with axial float installs captive in panel and still spins freely.

SCBJ Bulletin PF

The spinning clinch bolt with jacking feature installs captive in panel and still spins freely.

SCBR Bulletin PF

The spinning clinch bolt with axial float utilizes self-retracting spring.

SF, SFP Bulletin SF

SpotFast® self-clinching fasteners create a permanent, flush joining of two sheets of metal.

Bulletin SF SFK

SpotFast® self-clinching fasteners create a permanent, flush joining of metal to PCB or plastic panels.

SC, B

SFN Bulletin SFN

Spinning flare nut is a one-piece, flanged hex nut that is permanently captive and still spins freely in the sheet.

Bulletin CL SH

Nuts are for installation into thin, harder, high-strength materials.

Bulletin SF SFW

SpotFast® self-clinching fasteners create a permanent, flush joining of two sheets of metal. The washer allows for consistent pivoting of the two metal panels.

Bulletin FH SGPC

Install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations.

SKC Bulletin SK

KEYHOLE® standoffs designed for a board to be quickly slipped into place and removed by sliding it sideways and lifting it off.

Bulletin SK SKC-F

KEYHOLE® sheet joining fasteners designed to quickly join two sheets flat against each other and then can be removed.

SL Bulletins CL & LN

Locknuts designed with a unique TRI-DENT® locking feature, which meets demanding locking performance requirements.

SMPS, SMPP Bulletin CL

Nuts that feature a lower profile and can be mounted closer to the edge of a sheet than standard self-clinching nuts.

SMTPFLSM Bulletin K

Surface mount spring-loaded captive panel screws.

SMTPR Bulletin K

Surface mount panel fastener retainer that is used with Type PSHF screw.

SMTRA Bulletin K

Surface mount R'ANGLE® fasteners provide strong re-usable threads at right angle to PC board.

SMTSK Bulletin K

Surface mount KEYHOLE® standoffs that eliminate the need for attaching screws.

SMTSO, SMTSOB Bulletin K

Surface mount spacers and nuts are available threaded and unthreaded.

SMTSS Bulletin K

Surface mount standoffs that eliminate the need for attaching screws.

SO, SO4, SOA, SOS Bulletin S0

Thru-hole threaded and unthreaded standoffs installed with their heads flush with one surface of the mounting sheets.

SOAG, SOSG Bulletin S0

Grounding standoffs for clinching into metal chassis with "gripping teeth" at opposite end to firmly contact mating board.

SP Bulletins CL & SS

Specially hardened self-clinching nuts for installation into stainless steel sheets.

SSA, SSC, SSS Bulletin SSA

SNAP-TOP® standoffs featuring a spring action to hold a P.C. board securely without screws or threaded hardware.

T, T4 Bulletin MPF

microPEM® TackPin® fasteners for compact electronic assemblies enable sheet-to-sheet attachment.

TD, TDS Bulletin TD

TY-D® self-clinching tie-mounts provide secure attachment points for mounting wires to electronic chassis or enclosure.

TDO Bulletin TD

TY-D® self-clinching hooks enable users to easily attach, remove, and return tie-bundled wires to their mounting points.

TFH, TFHS Bulletin FH

Non-flush studs for sheets as thin as .020” / 0.51 mm.

THFE Bulletin FH

Heavy-duty studs for sheets as thin as .031" / 0.8 mm.

TK4, TKA Bulletin MPF

microPEM® TackSert® pins designed to hold a top panel to a bottom panel by broaching into the bottom panel.

TPS, TP4 Bulletin FH

Flush-mounted pilot pins with chamfered end to make mating hole location easy.

TPXS Bulletin FH

Alignment pin for ATCA® faceplate fastening solutions.

TS Bulletin MPF

TackScrew® fasteners enable cost-effective sheet-to-sheet attachment by simply pressing into place. Can be removed by simply unscrewing.

Bulletin S0 TS04

Standoffs for installation into ultra-thin stainless steel sheets as thin as .025" / 0.63 mm.

TSO, TS0A, TSOS Bulletin S0

Standoffs provide permanent threads in ultra-thin sheets.

U, UL Bulletin FE

Miniature nuts with strong threads. Available with locking or non-locking threads.

WN, WNS Bulletin WN

Self-locating projection weld nuts. The engineered projections prevent burn-outs in thin sheets.