PEMPEM Fastener Catalogue
Back to CLA / SL / PEM RT / SH / SMPS / SMPP / H / HNL Nuts parts

SH–0616–1X

CLA / SL / PEM RT / SH / SMPS / SMPP / H / HNL Nuts · Unified · PDF page 32 · PEM Fastener Catalogue

CLA / SL / PEM RT / SH / SMPS / SMPP / H / HNL Nuts · Unified · thread .375-16 (3/8-16)

Hard panel nut, No finish, with rust preventative oil.

Also written as SH-0616-1X.

Part number breakdown

SegmentCodeMeaning
TypeSHHard panel nut
Thread0616Thread size .375-16 (3/8-16)
Shank1—
FinishXNo finish, with rust preventative oil

Dimensions

Defines E, C, A, T. Technical drawing of a self-clinching nut with dimensions in inches. Key Entities and Dimensions: PEM RT® Stamp: Indicated on the top face of the fastener. E: Outside diameter of the fastener. C: Diameter of the pilot/clinching feature. A: Height/thickness of the clinching shank. T: Overall thickness of the nut body. Clinching profile: Note specifies that the profile may vary. Components: Includes a threaded internal hole and a knurled/clinching base for sheet metal installation.Defines E, C, A, T. Entity: PEM TRI-DENT® Locking Feature (self-clinching nut. Dimensions (inches: E: Overall diameter. C: Clinch diameter. A: Shank length/clinch profile depth. T: Overall thickness. Key Features: Clinching profile (may vary. TRI-DENT locking feature identified by triangular markings and "PEM" lettering on the face. Locking feature shape and position may vary.Defines E, C, A, T. The image is a technical drawing of a self-clinching nut, showing top and side-cutaway views with labeled dimensions: E: Overall outer diameter of the flange. C: Diameter of the clinching pilot. A: Height/length of the clinching pilot. T: Thickness of the nut body. Feature: Internal threading and a serrated clinching profile. Note: Clinching profile may vary due to manufacturing procedure.
DimensionValue
Thread Size.375-16 (3/8-16)
Type (Fastener Material) › Hardened Alloy SteelSH
Thread Code0616
Shank Code1
A (Shank) Max..087
Min. Sheet Thickness.090
Hole Size in Sheet +.003 −.000.500
C Max..499
E ±.010.623
T ±.010.270
Min. Dist. Hole ℄ To Edge.44

Material and finish

PropertyValue
TypeSH
ThreadsInternal ASME B1.1 2B/ASME B1.13M, 6H
Fastener MaterialsHardened Alloy Steel
Standard FinishesNo Finish
For use in Sheet HardnessHRC 30/ HB 277 or less

Source: Material and Finish Specifications · PDF page 33

Performance data

PropertyValue
Thread Code0616
Shank Code1
Test Sheet Thickness and Material (in.).098" S700MC
Sheet Hardness HRC23
Installation (lbs.)15300
Pushout (lbs.)1200
Torque-out (in. lbs.)500

Source: SH™ Nuts · PDF page 38

Installation tooling

PropertyValue
Thread Code0616
Anvil Dimensions (in.) › A ±.002.280
Anvil Dimensions (in.) › P ±.005.250
Anvil Part Number8020084 (1)
Punch Part Number9752000901400

Source: PEMSERTER® Installation Tooling · PDF page 35

Source

On this page

Part number breakdownDimensionsMaterial and finishPerformance dataInstallation toolingSource