A2 Referenced specifications, codes, and standards

The following specifications, codes, and standards are referenced in this Specification:

(a) American Concrete Institute (ACI)
ACI 216.1-14(19) and ACI 216.1M-14(19) Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies ACI 318-19 Building Code Requirements for Structural Concrete and Commentary ACI 318M-19 Metric Building Code Requirements for Structural Concrete and Commentary
ACI 349-13 Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary

ACI 349M-13 Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary (Metric)

(b) American Institute of Steel Construction (AISC) ANSI/AISC 303-22 Code of Standard Practice for Steel Buildings and Bridges ANSI/AISC 341-22 Seismic Provisions for Structural Steel Buildings ANSI/AISC N690-18 Specification for Safety-Related Steel Structures for Nuclear Facilities
(c) American Iron and Steel Institute (AISI)
AISI S923-20 Test Standard for Determining the Strength and Stiffness of Shear Connections of Composite Members
AISI S924-20 Test Standard for Determining the Effective Flexural Stiffness of Composite Members
(d) American Society of Civil Engineers (ASCE) ASCE/SEI 7-22 Minimum Design Loads and Associated Criteria for Buildings and Other Structures ASCE/SEI/SFPE 29-05 Standard Calculation Methods for Structural Fire Protection
(e) American Society of Mechanical Engineers (ASME) ASME B1.1-2019 Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)
ASME B18.2.6-19 Fasteners for Use in Structural Applications ASME B46.1-19 Surface Texture, Surface Roughness, Waviness, and Lay
(f) American Society for Nondestructive Testing (ASNT) ANSI/ASNT CP-189-2020 Standard for Qualification and Certification of Nondestructive Testing Personnel ASNT SNT-TC-1A-2020 Personnel Qualification and Certification in Nondestructive Testing
(g) ASTM International (ASTM)
A6/A6M-19 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A36/A36M-19 Standard Specification for Carbon Structural Steel
A53/A53M-20 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A193/A193M-20 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M-20a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A283/A283M-18 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A307-21 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60,000 PSI Tensile Strength

User Note: ASTM A325/A325M is included as a grade within ASTM F3125/ F3125M.

A354-17e2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A370-20 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A449-14(2020) Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

User Note: ASTM A490/A490M is included as a grade within ASTM F3125/F3125M.

A500/A500M-21 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

A501/A501M-14 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

A502-03(2015) Standard Specification for Rivets, Steel, Structural

A514/A514M-18e1 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

A529/A529M-19 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

A563/A563M-21 Standard Specification for Carbon and Alloy Steel Nuts (Inch and Metric)

A568/A568M-19a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Re-quirements for

A572/A572M-21e1 Standard Specification for High-Strength Low-Alloy Colum-bium-Vanadium Structural Steel

A588/A588M-19 Standard Specification for High-Strength Low-Alloy Struc-tural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

A606/A606M-18 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corro-sion Resistance

A618/A618M-04(2015) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

A673/A673M-17 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

A709/A709M-18 Standard Specification for Structural Steel for Bridges

A751-20 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

A847/A847M-20 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

A913/A913M-19 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

A992/A992M-20 Standard Specification for Structural Steel Shapes

A1011/A1011M-18a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

A1043/A1043M-18 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

A1065/A1065M-18 Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low-Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
A1066/A1066M-11(2015)e1 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
A1085/A1085M-15 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
C567/C567M-19 Standard Test Method for Determining Density of Structural Lightweight Concrete
E119-20 Standard Test Methods for Fire Tests of Building Construction and Materials
F436/F436M-19 Standard Specification for Hardened Steel Washers Inch and Metric Dimensions
F606/F606M-21 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
F844-19 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

F959/F959M-17a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series F1554-20 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

User Note: ASTM F1554 is the most commonly referenced specification for anchor rods. Grade and weldability must be specified.

User Note: ASTM F1852 and F2280 are grades within ASTM F3125/F3125M.

F3043-15 Standard Specification for "Twist Off" Type Tension Control Struc- tural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Mini- mum Tensile Strength
F3111-16 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
F3125/F3125M-19e2 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
F3148-17a Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144 ksi Minimum Tensile Strength, Inch Dimensions
(h) American Welding Society (AWS)
AWS A5.1/A5.1M:2012 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
AWS A5.5/A5.5M:2014 Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding

AWS A5.17/A5.17M:2019 Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding

AWS A5.18/A5.18M:2017 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding

AWS A5.20/A5.20M:2005 (R2015) Specification for Carbon Steel Electrodes for Flux Cored Arc Welding

AWS A5.23/A5.23M:2011 Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding

AWS A5.25/A5.25M:1997 (R2009) Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding

AWS A5.26/A5.26M:2020 Specification for Carbon and Low-Alloy Steel Elec-trodes for Electrogas Welding

AWS A5.28/A5.28M:2020 Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding

AWS A5.29/A5.29M:2010 Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding

AWS A5.32M/A5.32:2011 Welding Consumables—Gases and Gas Mixtures for Fusion Welding and Allied Processes

AWS B5.1:2013-AMD1 Specification for the Qualification of Welding Inspectors

AWS D1.1/D1.1M:2020 Structural Welding Code—Steel

AWS D1.3/D1.3M:2018 Structural Welding Code—Sheet Steel

(i) Gypsum Association GA-600-2021 Fire Resistance and Sound Control Design Manual
(j) Research Council on Structural Connections (RCSC) Specification for Structural Joints Using High-Strength Bolts, 2020
(k) Steel Deck Institute (SDI) ANSI/SDI QA/QC-2022 Standard for Quality Control and Quality Assurance for Installation of Steel Deck
(i) Underwriters Laboratories, Inc. (UL) ANSI/UL 263, Edition 14m, Standard for Fire Tests of Building Construction and Materials, 2018 ANSI/UL 263 Fire-Resistance Ratings—BXUV, Design No. X526, 2022 ANSI/UL 263 Fire-Resistance Ratings—BXUV, Design No. X528, 2022

A2Referenced specifications, codes, and standards