TablesJ Design of connections

Table J3.3: Nominal Hole Dimensions, in

PDF page 205 · AISC 360-22

Bolt Diameter	Hole Dimensions
Bolt Diameter	Standard (Dia.)	Oversize (Dia.)	Short-Slot (Width × Length)	Long-Slot (Width × Length)
1/2	9/16	5/8	9/16 × 11/16	9/16 × 11/4
5/8	11/16	13/16	11/16 × 7/8	11/16 × 19/16
3/4	13/16	15/16	13/16 × 1	13/16 × 17/8
7/8	15/16	11/16	15/16 × 11/8	15/16 × 23/16
1	11/8	11/4	11/8 × 15/16	11/8 × 21/2
≥11/8	d + 1/8	d + 5/16	(d + 1/8) × (d + 3/8)	(d + 1/8) × 2.5d

Table J3.2: Nominal Stress of Fasteners and Threaded Parts, ksi (MPa)

Previous Page

Table J3.4: Minimum Edge Distance[a] from Center of Standard Hole[b] to Edge of Connected Part

Next Page